Craftzine.com blog: The Soft Electric by Grace Kim

The Soft Electric by Grace Kim

The Soft Electric is an exploration in wearable fashion technology, designed by Grace Kim for her final thesis project at NYU's Interactive Telecommunications Program. Grace knit and felted the caplet by hand and embroidered the piece with conductive thread. The thread carries electric current to LEDs that are beaded into the embroidery. The LED beads flicker, acting like a sequin in the light. Link.

Gkim Tutorials

To help you get started in creating wearables yourself, Grace was nice enough write up an idea for a smaller project and she also posted up 2 of her tutorials on her flickr. Thanks Grace!

Tips from Grace:
One could make a simple LED bracelet using one LED, some wire, and a 3V coin cell battery. Twist each leg of the LED with a length of wire (make sure each leg is wrapped with a different piece of wire, so you don't short the LED out), wrap the wires around your wrist, then tape the wires to the corresponding sides of the battery. Instant, though somewhat crude, bracelet!

However, if you wanted to make a little softer and more wearable, you could substitute the wire for conductive thread. Curve the legs of the LED with roundnose pliers so they form loops. Whip a length of conductive thread around each loop a few times, then knot, leaving long tails. From here, you can do several things: you can sew the thread to a length of ribbon, felt, or leather to make wristband, make a soft battery holder for a more secure power connection, and make a power switch by using a metal snap to connect the line to ground. You could also get a little fancy and embroider the conductive thread on the surface of the band or use an LED sequin instead of the standard, round-top LED.

The most important thing is to start with a simple circuit. Get the technical aspects working, no matter how crude it looks, then slowly substitute hard components in the circuit with soft materials. Once you've done that, go back and rethink your circuit, shrinking the number of electronic components or rethinking the placement of elements on your board. Then rethink some of your soft materials. The hard electronics will inform the soft components and vice versa.

It took about a month for me to finish the capelet. It took 3 days to knit and felt the capelet and about forever to embroider it and incorporate the electronic components.

Tutorials:

How to make an LED bead (left) - Link.
How to create a soft battery holder (right)- Link.

Comments

Newest comments listed first.

Posted by: dixit on October 13, 2008 at 8:50 PM

http://www.dragg.in/

Very nice pictures

Posted by: on June 27, 2008 at 9:31 PM

You can get conductive fabric from www.lessemf.com "Zelt" is a good choice.

Posted by: Amy on December 11, 2007 at 11:14 PM

Very cool! But where did you get the conductive fabric for use in the battery holder?

Subscribe to CRAFT Magazine!

Subscribe today, save 42% and get web access to CRAFT free. CRAFT Digital Edition is available only to subscribers.

$34.95 / 1 year
(4 Quarterly Issues)

Subscribe now

Welcome to the CRAFT Blog! Your daily source for craft projects and inspiration.

CRAFT: Features & More

Fashioning Technology by Suyzi Pakhchyan

Take your craft projects to the next level with "smart" materials where you can create accessories, housewares, and toys that light up, make sounds, or do even more! Available now in the Maker Shed.

CRAFT: The First Year Box Set

In this special limited re-release, all 4 Volumes of Craft's first year are combined in a Special Edition Boxed Collector's Set. Box slip case is included in this set.

CRAFT Newsletter

Sign up for our bi-weekly CRAFT newsletter that covers popular topics from the blog! You can also see the archive of past newsletters.

Natalie Zee Drieu. Natalie Zee Drieu
Senior Editor

Jenny Ryan
Contributing Writer

Michelle Kempner
Tech Craftologist

Rachel Hobson
Maker Faire Austin Crafter

Suggest a Site!

Arwen O'Reilly
Staff Editor

Becky Stern
Craft Technologist

Phillip Torrone
Senior Editor, Makezine.com

Why advertise on CRAFT?
Read what folks are saying about us!

Click here to advertise on CRAFT!

Current Podcast

Get Crafty at Maker Faire Austin - CRAFT Video Podcast Maker Faire Austin is happening soon, the weekend of October 18-19 at the Travis County Expo Center in Austin, TX. Find out all about the crafty activities in store for you and your family in this week's podcast. Download... More...